The?MediaConverter Multi-Gigabit Marvell from Technica Engineering establishes a direct point-to-point conversion between Automotive ECUs using 10GBASE-T1 and any standard Gigabit Ethernet device. 
Technica Engineering的MediaConverter Multi-Gigabit Marvell，用以在使用10GBASE-T1的ECU和10GBASE-T標準萬兆以太網設備之間建立直接的全雙工點對點轉換，

In the conversion, no packets are stored or modified. The conversion takes place on the physical layer with the highest proven reliability, with no latency and no packet loss.
轉換中，不存儲和修改任何報文。轉換在物理層上工作，沒有延遲和丟包，具有最高的經驗證的可靠性。

This device which uses a PHY from?Marvell, is one of the first implementations worldwide of a multigigabit Automotive Ethernet physical layer media converter.
本身使用Marvell的phy芯片，是世界上首批發布的萬兆車載以太網物理層媒體轉換器。

A massive housing made of galvanized sheet steel, coupled with DIP switches for ease of configuration, enables the user to interact with the converter effortlessly.
由鍍鋅鋼板制成的外殼與易于配置的DIP開關相結合，使用戶能夠毫不費力地與轉換器交互。

No customized driver is needed to interact with this MediaConverter. It communicates with standard Ethernet through an SFP slot. It comes with an automotive-grade H-MTD connector and a standard SFP slot. 
本轉換器并不需要任何驅動程序，它分別通過汽車級的H-MTD接插件和一個SFP插槽使用標準以太網進行通信。

The devices can also be accessed using the debug connector for TX/RX register values as well as information regarding link quality. 
本設備也可以通過debug接口訪問Tx/Rx寄存器，以及獲取鏈接質量.

With the in-built status LEDs, the operation of the device is transparent and aids the tester to detect link-up and data transmission visually.
內置的狀態燈，能夠清晰地看到設備的工作狀態，幫助工程師直觀地觀測鏈接和數據傳輸情況。

No extra hardware or software complements are needed to connect the device with a PC or a Laptop. The device can be coupled with any hardware or software tool that runs on standard Ethernet with an RJ-45 connector.
并不需要額外的硬件和軟件來連接電腦或者筆記本。本設備僅需通過RJ45接頭的標準以太網線纜便可與其它軟硬件一起工作。

FEATURES

• Converts between 10GBASE-T1 Automotive Gigabit Ethernet and 10GBASE-T Standard Gigabit Ethernet or optical Ethernet
  在10GBASE-T1車載以太網和10GBASE-T標準以太網或者光纖之間轉換

• 1 × H-MTD port for 10GBASE-T1 Automotive Ethernet
  1 × H-MTD口用于10GBASE-T1車載以太網

• 1 × Standard SFP+ port
  1 × 標準SFP+口

• 4 × Status LEDs
  4 × 狀態指示燈

• 1 × MQS connector
  1 × MQS接插件

• Voltage requirement: 12-24 volt DC
  12-24伏直流

• Stainless steel housing
  不銹鋼外殼

• Size: 95 × 95 × 32mm
  尺寸： 95 ×95 × 32mm