能捕獲10路LIN以及6路模擬信號的新一代Capture Module
While the cars of the future start using high-speed in-vehicle-network (IVN) technologies, for the Body-Domain, the classic analogue signals and the cost efficient LIN Bus are still important technologies. 雖然未來的汽車開始使用高速車載網絡(IVN)技術,但對于Body-Domain而言,經典的模擬信號和具有成本效率的LIN總線仍然是重要的技術。 The CM LIN Combo enables automotive test engineers to reliably capture LIN traffic as well as differential and grounded analogue signals and send these within the PDUs of Ethernet MAC II frames via 100BASE-T1 or Standard Ethernet, with the corresponding time information of when they were captured. CM LIN Combo使汽車測試工程師能夠可靠地捕獲LIN流量以及差分和接地模擬信號,并封裝在以太網MAC II幀的PDU內,并帶有硬件時間戳,通過100BASE-T1或標準以太網發送。 Several devices can be used on the same setup, whenever more interfaces are needed, and when other IVN technologies are present, the inbuilt- synchronization using 802.1AS allows for simultaneous use with the other “IVN2Eth Capture Modules”. 如果需要更多接口,可以在同一環境使用多個設備,可使用內置的802.1AS協議與其他“IVN2Eth捕獲模塊”同步。 Many additional features make this device appropriate for general-purpose testing. 該設備還有許多用于通用測試的其他功能 FEATURES
10x LIN
4x analogue inputs
2x analogue inputs (galvanically isolated)
PLP Protocol (time stamp, ...) PLP協議
Configure easily via webserver 通過網絡服務器配置
Network Time Synchronization (802.1AS)– allows to synchronize multiple CAN Combos or any other “Capture Module”
Cascading and synchronization of multiple devices 級聯和同步多個設備
Source Timestamping with 40 ns resolution,40ns 精度的時間戳
High Speed Startup 高速啟動
Startup Buffer 啟動緩存
Output Traffic Shaping 輸出流量整型
Rotary Switch for manual configuration of the device’s IP-Addresses (Gbit – RJ-45) 用于人工設置設備的IP地址的的圓形開關
Wakeup capable 可以喚醒
Extended Power Mode for Car integration 擴展的電源管理功能用于車輛集成
Robust stainless-steel case 堅固的不銹鋼外殼
Size: 129 x 120 (134) x 32 mm 大小:129 x 120 (134) x 32 毫米