能捕獲2路100Base-T1和1路1000Base-T1的新一代Capture Module
With Ethernet as an in-vehicle-network (IVN) comes the challenge of capturing the traffic of these new technologies: 100BASE-T1 and 1000BASE-T1. 以太網作為車載網絡(IVN)帶來了捕獲這些新協議報文的挑戰:100BASE-T1和1000BASE-T1。 The CM Eth Combo provides the necessary ports to capture the traffic from 1 x 1000BASE-T1 line (between two DUTs) and 2 x 100BASE-T1 lines, correspondingly. CM Eth Combo提供必要的端口,以相應地捕獲來自1路1000BASE-T1線路(兩個DUT之間)和2路100BASE-T1線路的報文 The traffic is captured without causing interference on the network and delivered with a 40ns resolution hardware time stamp, thus making the analysis of AVB/TSN traffic possible. 捕獲報文不會對網絡造成干擾,并提供40ns分辨率的硬件時間戳,從而可以分析AVB/TSN流量。 Several devices can be used on the same setup, whenever more T1 ports are needed, and when other IVN technologies are present, the inbuilt-synchronization using 802.1AS allows for simultaneous use with the other “IVN2Eth Capture Modules”. 如果需要更多T1端口,都可以在同一環境上使用多個設備,可使用內置的802.1AS協議與其他“IVN2Eth捕獲模塊”同步。 Many additional features make this device appropriate for general-purpose testing. 該設備還有許多用于通用測試的其他功能 FEATURES
1 Link Line 1000BASE-T1 (2 Ports)
2 Link Line 100BASE-T1 (4 Ports)
PLP Protocol (time stamp, ...) PLP協議
Configure easily via webserver 通過網絡服務器配置
Network Time Synchronization (802.1AS)– allows to synchronize multiple CAN Combos or any other “Capture Module”
Cascading and synchronization of multiple devices 級聯和同步多個設備
Source Timestamping with 40 ns resolution 40ns精度的時間戳
High Speed Startup 高速啟動
Startup Buffer 啟動緩存
Output Traffic Shaping 輸出流量整型
Rotary Switch for manual configuration of the device’s IP-Addresses (Gbit – RJ-45) 用于人工設置設備的IP地址的的圓形開關
Wakeup capable 可以喚醒
Extended Power Mode for Car integration 擴展的電源管理功能用于車輛集成
Robust stainless-steel case 堅固的不銹鋼外殼
Size: 129 x 120 (134) x 32 mm 大小:129 x 120 (134) x 32 毫米