In the Era of autonomous driving one key challenge for the test and validation is the reliable capture of relevant in-vehicle-traffic from different communication technologies.
在自動駕駛時代，測試和驗證的一個關鍵挑戰是可靠地捕獲來自不同通信技術的相關車載報文。

With the CM CAN Combo from Technica Engineering, the traffic from the conventional CAN busses, as well as CAN-FD, FlexRay and RS-232 can be captured without interfering the original networks.
使用Technica Engineering的CM CAN Combo，可以捕獲傳統CAN總線以及CAN-FD，FlexRay和RS-232的流量，而不會干擾原始網絡。

The messages are timestamped with 40ns resolution when captured and sent within the PDUs of Ethernet MAC II frames via 100BASE-T1 or Standard Ethernet.
捕獲消息的時間戳為40ns，并封裝在以太網MAC II幀的PDU內通過100BASE-T1或標準以太網發送

Several devices can be used on the same setup, whenever more interfaces are needed, and when other IVN technologies are present, the inbuilt-synchronization using 802.1AS allows for simultaneous use with the other “IVN2Eth Capture Modules”.
如果需要更多接口，都可以在同一搭建上使用多個設備，可使用內置的802.1AS協議與其他“IVN2Eth捕獲模塊”同步。

Many additional features make this device appropriate for general-purpose testing.
該設備還有許多用于通用測試的其他功能

FEATURES

• 6x CAN/CAN-FD

• 1x FlexRay

• 2x RS-232/TTL

• PLP Protocol (time stamp, ...) 
  PLP協議

• Configure easily via webserver
  通過網絡服務器配置

• Network Time Synchronization (802.1AS)– allows to synchronize multiple CAN Combos or any other “Capture Module”

• Cascading and synchronization of multiple devices
  級聯和同步多個設備

• Source Timestamping with 40 ns resolution
  40ns精度的時間戳

• High Speed Startup
  高速啟動

• Startup Buffer
  啟動緩存

• Output Traffic Shaping 
  輸出流量整型

• AVB/TSN Capture capable

• Time-Aware Injection

• Rotary Switch for manual configuration of the device’s IP-Addresses (Gbit – RJ-45)
  用于人工設置設備的IP地址的的圓形開關

• Wakeup capable 
  可以喚醒

• Extended Power Mode for Car integration 
  擴展的電源管理功能用于車輛集成

• Robust stainless-steel case 
  堅固的不銹鋼外殼

• Size: 129 x 120 (134) x 32 mm
  大小：129 x 120 (134) x 32 毫米