The future brings connected and self-driving cars, for which an unprecedented amount of data is required. One technology soon to hit the road that addresses this challenge is Automotive Gigabit Ethernet.
互聯和自動駕駛是汽車的未來，需要前所未有的大量數據。 很快就能應對這一挑戰的一項技術是汽車千兆以太網。

With 12 ports, up-to 6 point-to-point 1000BASE-T1 connections can be captured with the Capture Module 1000 High. Using 40ns resolution hardware time stamp and highly deterministic latency times, AVB/TSN traffic remains synchronized and can be accurately analyzed. For the high amount of data, both Standard Gigabit Ethernet, as well as SFP+ interfaces provide enough bandwidth for the uplink
通過12個端口，Capture Module 1000 High可以捕獲最多6個點對點1000BASE-T1連接。使用40ns分辨率硬件時間戳和高確定性延遲時間，AVB/TSN報文保持同步并且可以準確分析。對于大量數據，標準千兆以太網以及SFP+接口都為上行鏈路提供了足夠的帶寬

Several devices can be used on the same setup, whenever more 1000BASE-T1 ports are needed, and when other IVN technologies are present, the in-built-synchronization using 802.1AS allows for simultaneous use with the other “IVN2Eth Capture Modules”.
當需要更多100BASE-T1端口，同一個環境可以使用多個設備，可使用內置的802.1AS協議與其他“IVN2Eth捕獲模塊”同步。

Many additional features make this device appropriate for general-purpose testing.
該設備還有許多用于通用測試的其他功能


FEATURES

• 6 x Link Lines 1000BASE-T1 (12 Ports)
  

• PLP Protocol (time stamp, ...) 
  PLP協議

• Configure easily via webserver
  通過網絡服務器配置

• Network Time Synchronization (802.1AS)– allows to synchronize multiple CAN Combos or any other “Capture Module”

• Cascading and synchronization of multiple devices
  級聯和同步多個設備

• Source Timestamping with 40 ns resolution
  40ns精度的時間戳

• High Speed Startup
  高速啟動

• Startup Buffer
  啟動緩存

• Output Traffic Shaping 
  輸出流量整型

• AVB/TSN Capture capable

• Time-Aware Injection

• Rotary Switch for manual configuration of the device’s IP-Addresses (Gbit – RJ-45)
  用于人工設置設備的IP地址的的圓形開關

• Wakeup capable 
  可以喚醒

• Extended Power Mode for Car integration 
  擴展的電源管理功能用于車輛集成

• Robust stainless-steel case 
  堅固的不銹鋼外殼

• Size: 129 x 120 (134) x 32 mm
  大小：129 x 120 (134) x 32 毫米