能捕獲6路100Base-T1的新一代Capture Module
Automotive Ethernet has conquered the modern E/E vehicle network.The challenges that arise during test and validation include a reliable capture of AVB/TSN traffic, without interfering with the network timing. This challenge gets even bigger, with the need for diagnostics protocols to be sent to the DUTs during run-time. 汽車以太網進入了現代E/E車輛網絡。可靠地捕獲AVB/TSN流量,而不干擾網絡時序是測試和驗證過程中出現的挑戰。這一挑戰變得更大,尤其是在需要在運行時發送診斷報文到被測對象。 Technica Engineering’s CM 100 High Capture Module was specifically designed to solve these problems and many more, such as ensuring that it starts-up faster than the DUT’s whose traffic it will capture and that the traffic is delivered with hardware time stamp. Technica Engineering公司的CM 100 High捕獲模塊專門用于解決這些問題,例如確保它的啟動速度比DUT快,捕獲報文打上硬件時間戳。 Several devices can be used on the same setup, whenever more 100BASE-T1 ports are needed, and when other IVN technologies are present, the in-built-synchronization using 802.1AS allows for simultaneous use with the other “IVN2Eth Capture Modules”. 當需要更多100BASE-T1端口,同一個環境可以使用多個設備,并使用內置的802.1AS協議與其他“IVN2Eth捕獲模塊”同步。 Many additional features make this device appropriate for general-purpose testing. 該設備還有許多用于通用測試的其他功能 FEATURES
6 x Link Lines 100BASE-T1 (12 Ports)
PLP Protocol (time stamp, ...) PLP協議
Configure easily via webserver 通過網絡服務器配置
Network Time Synchronization (802.1AS)– allows to synchronize multiple CAN Combos or any other “Capture Module”
Cascading and synchronization of multiple devices 級聯和同步多個設備
Source Timestamping with 40 ns resolution 40ns精度的時間戳
High Speed Startup 高速啟動
Startup Buffer 啟動緩存
Output Traffic Shaping 輸出流量整型
AVB/TSN Capture capable
Time-Aware Injection
Rotary Switch for manual configuration of the device’s IP-Addresses (Gbit – RJ-45) 用于人工設置設備的IP地址的的圓形開關
Wakeup capable 可以喚醒
Extended Power Mode for Car integration 擴展的電源管理功能用于車輛集成
Robust stainless-steel case 堅固的不銹鋼外殼
Size: 129 x 120 (134) x 32 mm 大小:129 x 120 (134) x 32 毫米