Description 

The 100BASE-T1 SFP Module is the optimum solution to convert between 100BASE-T1 and SGMII. It ?ts into a standard Small Form-factor Pluggable (SFP) and generates 100 Mbit/s full-duplex 100BASE-T1.
100BASE-T1 SFP模塊是在100BASE-T1和SGMII之間進行轉換的最佳解決方案。采用標準的小型可插拔（SFP），可生成100 Mbit/s全雙工100BASE-T1。

It configures itself to Automotive 100BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.
它在上電后配置為車載100BASE-T1。可以使用DIP開關設置主/從操作模式。

Registers of the integrated Transceiver are accessible via I2C interface for diagnosis and recon?guration.
可通過I2C接口訪問集成收發器的寄存器，以進行診斷和重新配置。

It works seemlessly with our MediaGateway, which has one SFP slot.
它與我們的MediaGateway無縫兼容，MediaGateway有一個SFP插槽。

However, the SFP Modules do not work in a “plug-and-play” manner with any SFP-capable system. 
In order to set-up the SFP Modules to work in your system, you must be able to interact via I2C and contact Broadcom (the PHY manufacturer) to receive the NDA (Non Disclosure Agreement)
 protected PHY-register setting datasheet to initialize the phy properly. In this regard, Technica cannot support, due to NDA restrictions.”
但是，SFP 模塊不能與任何支持 SFP 的系統以“即插即用”方式工作。
為了設置 SFP 模塊在您的系統中工作，您必須能夠通過 I2C 進行交互并聯系 Broadcom（PHY 制造商）收到 NDA（保密協議）保護的 PHY 寄存器設置數據表以正確初始化 phy。 
對此，由于保密協議的限制，Technica 無法提供支持。

Features 產品特點

• 100BASE-T1 and SGMII converter
  實現100Base-T1和SGMIi轉換

• DIP switch for Master/Slave con?guration
  通過DIP開關實現Master/Slave配置

• Supports I2C for internal register access
  收發器的寄存器可以通過I2C接口訪問

• Fits into a standard SFP Slot
  適用標準的SFP插槽

• Power requirements: 3.3 Volt DC
  供電：3.3V 直流

• Size: 68 x 14 x 14 mm
  尺寸：68 x 14 x 14 毫米